Concrete patio construction in Baldwin Park CA - a backyard slab on a solid base
Bare dirt or a cracked old slab out back? We dig out, pack the base and pour a patio you can use every day.
A concrete patio for the yard out back
Concrete patio construction is flatwork, the trade's word for flat pours like patios, walks and driveways. Our crew forms, pours, places and finishes a slab in your yard where you'll put the table, the grill and the chairs. We're based in Baldwin Park and build patios here and in the cities around it.
Most of the job happens before the pour. We dig out the soil and pack the subgrade, which is the ground the slab sits on, before we set the forms and pour. Then we finish the top and cut control joints, shallow grooves that give the slab a planned place to crack instead of a random one.
Three things set most of the price: the size of the patio, how much digging the base needs and the finish you pick. The schedule turns on the prep work, the weather on pour day and curing, the wait while the slab hardens enough to use. I put your number in writing at the estimate, with what's included and what isn't.
What a new concrete patio fixes in your yard
Bare dirt by the back door
A strip of packed dirt or tired grass turns to mud when it rains and gets tracked right into the house. A concrete patio gives you a flat, clean place for a table and chairs that you can sweep or hose off.
An old slab that's cracked or sinking
When an old patio breaks up or drops at one corner, the usual cause is a base that was raked smooth instead of dug out and packed. Patching the top won't fix that, so we take the old slab out and start again from the ground.
Water sitting where it shouldn't
A slab that dips in the middle holds puddles, and one that falls toward the house sends rain at your foundation. Before we pour, we check where the water runs and set the new patio to shed it away from the house.
Patio, stamped concrete or a sidewalk?
If you want a place to sit, eat and grill, a plain patio is the job. A broom finish, a light texture brushed into the wet top so it isn't slick, or a smoother trowel finish both give you a subtle surface that's easy to live with.
If you want the slab to look like stone, brick or tile, that's stamped concrete, which starts with the same base and pour and then gets pressed with a pattern. One home services guide says to find a contractor who specializes in the finish you want, so ask to see that kind of work.
If what you really need is a path from the driveway or the gate to the backyard, that's a concrete sidewalk. Plenty of yards need both, and planning them together lets us set the joint right where the walk meets the patio.
What to settle with us before the pour
Where the patio meets the house
I'll ask where the new slab will touch the house, the walk, a garage slab or any steps. At those spots we set isolation joints, also called expansion joints, a strip that keeps the patio from binding against the fixed parts next to it.
Whether a cover might go up
If a roof or pergola could go up someday, tell me now. One home services guide says the supports for a cover need their own footings, and those are much easier to plan before the pour than to work in afterward.
Where the budget should go
The base is hidden on day one, so it's the first thing people want to trim. I'd rather spend on digging out and packing the ground and keep the finish simpler, because a fancy top on a weak base settles and cracks with the dirt under it.
Patio permits and work in Baldwin Park
In Baldwin Park, the city's Building and Safety Division issues building permits, checks plans and inspects job sites against the permits it issues. That office is the one to ask about your own patio, so we check for your address, and when a job needs a permit, we take care of it as part of the work.
Where an old patio has cracked or sunk, or there's only dirt off the back door, tell us what you've noticed and how you want to use the space. We do the same patio work in West Covina, El Monte and other cities around Baldwin Park.
Questions people ask before a patio pour
How much does a concrete patio cost in Baldwin Park?
A concrete patio slab in the Los Angeles area usually costs about $8 to $15 per square foot, and that's a regional guide, not our price. Labor can run higher when the yard is hard to get into, the soil is poor or the design is intricate. I'll give you a written number for your yard after I walk it.
Will my new concrete patio crack like the old one?
Some cracking can't be prevented entirely, but well-planned joints control it and keep it small. We cut the control joints on time so cracks tend to follow those lines, and wire mesh won't stop cracking either, though it tends to keep cracks from opening up. Ask me how the joints will be laid out on yours.
Who is allowed to build a concrete patio in California?
California's contractor board licenses concrete contractors to form, pour, place and finish flat concrete work like patios. We're licensed and fully insured, and our work is satisfaction guaranteed. I come out myself to write the estimate, and I'm on site running our crew when the work gets done.
Can you pour a concrete patio on a hot day?
Yes, but heat, low humidity and wind all change how concrete behaves and how our crew mixes, moves and places it. On hot days we'd rather pour early than at midday, because a slab that dries too fast can end up with a weak, dusty top.
How long will I be without my backyard during a patio job?
You lose that part of the yard from tear-out until the slab has cured and can take weight. How long that runs depends on the size, the base work and the weather, so I lay out the schedule with you at the estimate and tell you when it's ready for foot traffic and furniture.
Tell us about the patio you have in mind
Send the size, photos of yard access, your finish and any cover plans. We'll reply within one business day to set up a free on-site estimate, no obligation.
(626) 412-8829Mon–Fri: 6 AM–11 PM, Sat–Sun: 7 AM–11 PM